Untuk mendapatkan informasi lebih lengkap tentang:

ILIX 6052XB Drill Bit DIN 6537L

Segera Hubungi Kami :

ILIX is the specialist for holemaking and high-precision cutting tools. Ilix offers a wide product range of high-quality, precise and effective products for different tasks; from dry machining with high performances twist drills (VHM) to thread production or reaming even in hundredth increment sizes. Ilix provides highest precision for today’s most demanding applications.

ILIX 6114 is a solid carbide drills with straight shank made of HSS. ILIX 6114 drills are made to conform with DIN 6537L standard with the finest HSS cobalt which produces higher toughness and hardness. Depends on your coating selection and cuting speed, you can drill Inconel, Stainless Steel, Titanium with a tensile strength up to 1.000 N/mm2.

ILIX 6052XB Drill Bit DIN 6537L Features:

Dimensions: Ref. 6052XB DIN 6537L
Shank: DIN 6535 HA
Material: Solid carbide sub micrograin K 40F (10 - 12% Co)
Surface Treatment: TiAIN Multilayers nanocomposite
Range: ø mm: 3-16
PDF catalog can be downloaded here (50 MB)

Ilix 6052XB features

SPESIFIKASI ILIX 6052XB Drill Bit DIN 6537L

Cutting parameters

Material	Vc (m/min)	Feed f (mm/r) for ø
Material	6052XB	3 - 5 5 xd	5 - 8 5xd	8 - 12 5xd	12 - 16 5xd
Stainless, heat and acid resistant steel (Ni < 3%)	70	0.04 - 0.055	0.06 - 0.08	0.08 - 0.12	0.12 - 0.20
Stainless, austentic, heat and acid resistant steel (Ni > 4%)	45	0.025 - 0.035	0.035 - 0.06	0.06 - 0.10	0.10 - 0.15
Special alloys based on Ni-Co 900 - 1,200 N/mm²	40	0.03 - 0.05	0.05 - 0.08	0.08 - 0.11	0.11 - 0.15
Titanium and titanium alloys up to over 700 N/mm²	50	0.03 - 0.05	0.05 - 0.08	0.08 - 0.10	0.10 - 0.14

These conditions can be applied for continuous cut. In case of cross hole drilling or, with entry and exit on irregular faces or angles, the above mentioned values have to be reduced by 50%. Minimum pressure required is 10 bar.

N.cod.						6052XB	N.Cod.						6052XB	N.cod.						6052XB
Type Record						VA i	Type Record						VA i	Type Record						Va i
Cutting direction						Right hand	Cutting direction						Right hand	Cutting Direction						Right hand
Material						K 40F	Material						K 40F	Material						K 40F
ø mm d₂ m7	l1	l2	l3	l4	h6		ø mm d₂ m7	l1	l2	l3	l4	h6		ø mm d₂ m7	l1	l2	l3	l4	h6
3.0	66	28	23	36	6	•	6.7	91	53	43	36	8	•	10.4	118	71	56	45	12	•
3.1	66	28	23	36	6	•	6.8	91	53	43	36	8	•	10.5	118	71	56	45	12	•
3.2	66	28	23	36	6	•	6.9	91	53	43	36	8	•	10.6	118	71	56	45	12	•
3.3	66	28	23	36	6	•	7.0	91	53	43	36	8	•	10.7	118	71	56	45	12	•
3.4	66	28	23	36	6	•	7.1	91	53	43	36	8	•	10.8	118	71	56	45	12	•
3.5	66	28	23	36	6	•	7.2	91	53	43	36	8	•	10.9	118	71	56	45	12	•
3.6	66	28	23	36	6	•	7.3	91	53	43	36	8	•	11.0	118	71	56	45	12	•
3.7	66	28	23	36	6	•	7.4	91	53	43	36	8	•	11.1	118	71	56	45	12	•
3.8	74	36	29	36	6	•	7.5	91	53	43	36	8	•	11.2	118	71	56	45	12	•
3.9	74	36	29	36	6	•	7.6	91	53	43	36	8	•	11.3	118	71	56	45	12	•
4.0	74	36	29	36	6	•	7.7	91	53	43	36	8	•	11.4	118	71	56	45	12	•
4.1	74	36	29	36	6	•	7.8	91	53	43	36	8	•	11.5	118	71	56	45	12	•
4.2	74	36	29	36	6	•	7.9	91	53	43	36	8	•	11.6	118	71	56	45	12	•
4.3	74	36	29	36	6	•	8.0	91	53	43	36	8	•	11.7	118	71	56	45	12	•
4.4	74	36	29	36	6	•	8.1	103	61	49	40	10	•	11.8	118	71	56	45	12	•
4.5	74	36	29	36	6	•	8.2	103	61	49	40	10	•	11.9	118	71	56	45	12	•
4.6	74	36	29	36	6	•	8.3	103	61	49	40	10	•	12.0	118	71	56	45	12	•
4.7	74	36	29	36	6	•	8.4	103	61	49	40	10	•	12.5	124	77	60	45	14	•
4.8	82	44	35	36	6	•	8.5	103	61	49	40	10	•	13.0	124	77	60	45	14	•
4.9	82	44	35	36	6	•	8.6	103	61	49	40	10	•	13.5	124	77	60	45	14	•
5.0	82	44	35	36	6	•	8.7	103	61	49	40	10	•	14.0	124	77	60	45	14	•
5.1	82	44	35	36	6	•	8.8	103	61	49	40	10	•	14.5	133	83	63	48	16	•
5.2	82	44	35	36	6	•	8.9	103	61	49	40	10	•	15.0	133	83	63	48	16	•
5.3	82	44	35	36	6	•	9.0	103	61	49	40	10	•	15.5	133	83	63	48	16	•
5.4	82	44	35	36	6	•	9.1	103	61	49	40	10	•	16.0	133	83	63	48	16	•
5.5	82	44	35	36	6	•	9.2	103	61	49	40	10	•
5.6	82	44	35	36	6	•	9.3	103	61	49	40	10	•
5.7	82	44	35	36	6	•	9.4	103	61	49	40	10	•
5.8	82	44	35	36	6	•	9.5	103	61	49	40	10	•
5.9	82	44	35	36	6	•	9.6	103	61	49	40	10	•
6.0	82	44	35	36	6	•	9.7	103	61	49	40	10	•
6.1	91	53	43	36	8	•	9.8	103	61	49	40	10	•
6.2	91	53	43	36	8	•	9.9	103	61	49	40	10	•
6.3	91	53	43	36	8	•	10.0	103	61	49	40	10	•
6.4	91	53	43	36	8	•	10.1	118	71	56	45	12	•
6.5	91	53	43	36	8	•	10.2	118	71	56	45	12	•
6.6	91	53	43	36	8	•	10.3	118	71	56	45	12	•

Harga ILIX 6052XB Drill Bit DIN 6537L

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

I authorize the use of the information given above for marketing purposes.

ILIX 6052XB Drill Bit DIN 6537L

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

SPESIFIKASI ILIX 6052XB Drill Bit DIN 6537L

Harga ILIX 6052XB Drill Bit DIN 6537L

ILIX 6052XB Drill Bit DIN 6537L

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

SPESIFIKASI ILIX 6052XB Drill Bit DIN 6537L

Harga ILIX 6052XB Drill Bit DIN 6537L

Produk Terkait