Untuk mendapatkan informasi lebih lengkap tentang:

Pao Fong Vertical Milling Machine PF-2S

Segera Hubungi Kami :

Pao Fong Vertical Milling Machine PF-2S is devised as a value line of manual milling machine which vertically oriented on the spindle axis with minimal friction. The Milling cutters are held in the spindle and rotate on its axis with the versatility of extended (or the table can be raised/lowered) which allows plunge cuts and drilling of various workpiece. The perfect combination of compact form factor within 1 tons of weight and spartan 3 HP electric motor is highly considered by many fabricator to work on various range of workpiece (other brands on the same class offer 2HP motors with similar spec). You can also easily install additional accesories such as coolant sprayer, magnetic base indicators, magnifiers, UV lamp or digital readout (DRO) for easy alignement of its table to suit your application.

Thanks to its monocoque frames which are made of high quality casted iron, the vibrations and noise can be absorbed and minimized your operators' fatigue. You can also do a angular cutting operation within 40^o backward and 45^o forward whilst from left to right within -90^o to +90^o. Pao Fong Vertical Milling Machine PF-2S provides two methods of cutting in the vertical (Z) direction: by raising or lowering the quill. This practical turret mill is delivered with a 228 x 1066 mm table which has a stationary spindle and can be easily fine tuned with its motorised spindle on both perpendicular and parallel to the spindle axis to accomplish precision cutting. This compact turret mill is also equipped with a quill which allows the milling cutter to be raised and lowered in a manner similar to a drill press.

Your investment on Pao Fong Vertical Milling Machine PF-2S will improve your machining capabilities in terms of its faster machining set up in daily routines and durabilty of its motor on dispersing heat on higher load. Compared to other Bridgeport-styled machine, Pao Fong Vertical Milling Machine PF-2S also offer you a much better precision in terms of vibration reduction and its auto lubrication mechanism. The durable turret styled milling PF-2S machine is suitable for any level of fabrication who consider long terms value within an affordable budget. However, if you are looking for higher power of 5 HP motor, you might also wants to consider Pao Fong Vertical Milling Machine PF-5S.

Pao Fong Vertical Milling Machine PF-2S Features:

Works as both medium class milling and heavy duty drill press
3 HP Spindle Motor
9"x 42"table standard
Spindle Taper NST# 30, or R8,
Spindle Taper NST# 40 optional.
Special Square Head for Step Speed
X,Y,Z-axes. Dovetail slide ways
X.Y.-axes Coated with Teflon – B
X.Y,Z.-axes Hardened & Ground

Optional Equipment:

Coolant System
Chip (pan ) Guard
Work Lamp
Electrical Cabinet
Power feed - X,Y,Z .Axes
Milling Vise , Clamping Kits
Milling Chuck with Collets
Digital Readout - X,Y,Z .Axes

Delivered With Standard Accessories:

Draw Bar
Tools & Tool Box
Operation Manual
One Shot Lubrication
Front & Rear Plastic Splash Guard

SPESIFIKASI Pao Fong Vertical Milling Machine PF-2S

Pao Fong Vertical Milling Machine PF-2S Ordering Guide:


Working Surface	228x1066 mm
Longitudinal Travel (X-axis)	676 mm
Cross Travel (Y-axis)	310 mm
Knee Travel (Z-axis)	406 mm
T-slot (3)	15,9 mm
Quill Travel	127 mm
Quill Diameter	85,725 mm
Spindle Taper	R8 or N.S.T#30
Quill Feeds	0,04/0,08/0,15
Spindle Motor	3 HP
Step Spindle Speed	50Hz : 70~2720 16speed : 70~4530 rpm (OPT) 60Hz : 80~2720 16speed : 80~5440 rpm (OPT)
Overall Height A	2019 mm
Overall Depth B	1620 mm
Overall Width C	1488 mm
Ram Travel	450 mm
Overarm Swivel on Turret	360^o
Head Tilf Front to Back	40^o - 0^o - 45^o
Head Tilf Left to Right	90^o - 0^o - 90^o
Approx. Net Weight	950 kgs
Packing Dimensions	148x140x186 cm

Pao Fong Vertical Milling Machine With Other Higher Models Ordering Guide:


Model	PF – 5S	PF – 5VS	PF–6S		PF – 6VS
Working Surface	254 x 1372 mm		254 x 1372 mm
Longitudinal Travel (X-axis)	930 mm		900 mm
Cross Travel (Y-axis)	420 mm		400 mm
Knee Tavel (Z-axis)	470 mm		460 mm
T – slot (3)	15.9 mm
Quill Travel	125 mm
Quill Diameter	105 mm
Spindle Tapper	N.S.T # 40
Qill Feeds	0.04/0.08/0.15 mm (0.0015” – 0.003” – 0.006)
Spindle Motor	5 HP
Step Spindle Speeds	50 Hz: 4P/8P-35 ~ 2850 r.p.m. 2P/4P-70 ~ 4700 r.p.m. (O.P.T) 60Hz: 4P/8P-45 ~ 3000 r.p.m. 2P/4P-90 ~ 3600 r.p.m. (O.P.T)
Veriable Spindle Speeds	50 Hz: 4P/8P-55 ~ 2720 r.p.m. 3900 r.p.m. (O.T.P) 60 Hz: 4P/8P-70 ~ 3400 r.p.m.
Overal Height H	2380 mm		2540 mm
Overal Depth L	2000 mm		1970 mm
Overal Width W	2180 mm		2180 mm
Ram Travel	584 mm		584 mm
Overarm Swivel On Turret	360^o
Head Tilt Front – to – back	40^o – 0^o – 45^o
Head Tilt Left – to – right	90^o – 0^o – 90^o
Approx. Net Weight	1588 / 1668 kgs			1637 / 1716 kgs
Packing Dimensions	171 x 155 x 200 cm			179 x 153 x 217 cm