1. Home
  2. Products
  3. Stroboscope
  4. Shimpo LED Stroboscope DT-361 & DT-365 Series

Untuk mendapatkan informasi lebih lengkap tentang:

Shimpo LED Stroboscope DT-361 & DT-365 Series

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Shimpo LED Stroboscope DT-361, DT-365 Series is devised to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially towards fast moving and flowing object by using the latest Light emitting diode technology as the lamp source. The DT-361 is also capable of being synchronized with an input signal. To complete the system, the DT-361 has a power output to supply an input sensor if desired. The sturdy aluminum enclosure is IP65 water proof level (NEMA4X), allowing versatile application in harsh environments.

Compared to regular light bulb, The DT-361, DT-365 is consume lesser energy and takes faster charging time while possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply. The quick recharge battery lasts up to six hours of full continuous usage with its high intensity flash rate.

The light output (Lux) of the LED array is far brighter than not only xenon powered stroboscopes, but all comparable LED stroboscopes on the market. The DT-361 has a vibrant red LED display that is ideal for viewing in dark locations. User friendly keypad plus rate adjustment dial will ease quick changes of the flash rate to coincide with changes in the speed of your process. The dial also allows fine-tune altering of the flash rate while the x2/÷2 keys enable quick spanning over the entire flash range. Furthermore, you can modify the flash duration or on time which aids in picture clarity often necessary in printing processes.

Your smart investment on Shimpo DT-361 LED Stroboscope will allows you to determine speeds, inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, industrial fan inspection plus many more. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section on the machinery.

Shimpo LED Stroboscope DT-361 & DT-365 Serie Features:

  • Internal, fast-charge rechargeable battery supply
  • Aluminum construction provides exceptional durability
  • IP65 water proof level (NEMA4X)
  • Range (fpm): 60 to 120,000, Accuracy: ±0.02% of reading
  • Display: 6 digit LED
  • Resolution (fpm): Internal mode: 1 FPM; External mode: 0.1 FPM
  • Flashtube life: 50,000 hours
  • High polish and focused reflector eliminates “blind” viewing areas
  • External trigger allows unit to be automatically synchronized with equipment
  • Continuous duty cycle eliminates need to shut down for cooling
  • Phase shift allows visual analysis of rotating/reciprocating objects
  • High accuracy ( ±0.01% of reading ) is ideal for QC inspection and process control.
  • Synchronous output enables strobe to drive other strobes
  • Flash timer control conserves flash tube life
  • Easy tri-pod or permanent mounting with integral mounting thread

 

SPESIFIKASI Shimpo LED Stroboscope DT-361 & DT-365 Series

Shimpo LED Stroboscope DT-361 & DT-365 Series Ordering Guide:

 
型式 DT-361 DT-365
用途 AC電源入力型 充電式電池内蔵型
内部発振
発光		 発光回数 60～120,000fpm
設定精度 ±0.02％
計測レンジ設定 60～120,000fpm レンジ　又は
60～12,000fpm レンジ　に設定可能
設定表示分解能
（内部発振）		 計測レンジ：
60～12,000fpm		 60.0～ 3,000.0 ： 0.1fpm
3,000.2～ 6,000.0 ： 0.2fpm
6,000.5～12,000.0 ： 0.5fpm
計測レンジ：
60～120,000fpm		 60～ 30,000 ： 1fpm
30,00.2～ 60,000 ： 2fpm
60,00.5～100,000 ： 5fpm
100,010～120,000 ： 10fpm
発光周波数設定変更機能 発光周波数をダイヤルで任意の値に変更可能
キー操作で発光周波数を現在の2倍、1/2倍に変更可能
（キーを押す毎に２倍４倍...、1/2倍1/4倍... に変更）
位相変更機能 現在の発光位相を基準に、
角度設定時：0～359°の範囲で1°毎
       時間設定時：0～最大999msの範囲で1ms毎
外部同期
発光		 入力インターフェイス Hi：2.5V～12V、Lo：0～0.5Vの電圧パルス入力
またはオープンコレクタ入力
パルス出力インターフェイス 12Vの電圧パルス出力
パルス幅 ：約200μs
同期エッジ切替 立上りエッジ／立下りエッジのいずれかを選択可能
周波数測定範囲 40～35,000fpm
遅延発光可能範囲 60～10,000fpm
位相設定可能範囲 遅延角度：0～359°の範囲で1°毎
遅延時間：0～最大999msの範囲で1ms毎※1
センサ用電源 DC12V／max50mA
発光幅 角度 0.1～3.6°（/360°）の範囲で0.1°毎に設定可能
時間 最大400μsec
表示器 6桁赤色LED
設定器 多回転エンコーダ、タクトスイッチ
発光源 超高輝度白色LED　18灯
コネクタ 入出力信号コネクタ 電源・入出力信号一体コネクタ
メモリ機能    •電源OFF時の設定値の保存
•内部発振時、外部同期時
の設定値をそれぞれ5つずつ保存
オート発光停止 連続発光または1～120分の範囲で1分毎に設定可能
電源 AC100～230V（50Hz/60Hz）  内蔵ニッケル水素電池
    •連続発光時間
     約2時間（発光幅3.6°設定時）
     約5時間（発光幅1.0°設定時）
    •充電時間　約2.5時間
 
 付属ACアダプタ
    •入力：AC100～230V
    •出力：DC24V
使用周囲温度 0～35℃
使用周囲湿度 35～85％RH
使用環境 塵埃、腐食性ガスなきこと
準拠規格 RoHS
保護構造 IP65相当
質量 約1.8kg 約2.1kg
付属品 外部入出力コネクタ（8pin）　1ヶ　 専用ACアダプタ　1ヶ
         
※１　内部演算処理による遅延時間約30μsが加算されます。  

 

Harga Shimpo LED Stroboscope DT-361 & DT-365 Series

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Shimpo LED Stroboscope DT-361, DT-365 Series is devised to simplify the measure of revolutions, velocity and frequency of rotating components or moving parts especially towards fast moving and flowing object by using the latest Light emitting diode technology as the lamp source. The DT-361 is also capable of being synchronized with an input signal. To complete the system, the DT-361 has a power output to supply an input sensor if desired. The sturdy aluminum enclosure is IP65 water proof level (NEMA4X), allowing versatile application in harsh environments.

Compared to regular light bulb, The DT-361, DT-365 is consume lesser energy and takes faster charging time while possesses the same great features of the DT-311A with the added convenience of total portability via its own internal power supply. The quick recharge battery lasts up to six hours of full continuous usage with its high intensity flash rate.

The light output (Lux) of the LED array is far brighter than not only xenon powered stroboscopes, but all comparable LED stroboscopes on the market. The DT-361 has a vibrant red LED display that is ideal for viewing in dark locations. User friendly keypad plus rate adjustment dial will ease quick changes of the flash rate to coincide with changes in the speed of your process. The dial also allows fine-tune altering of the flash rate while the x2/÷2 keys enable quick spanning over the entire flash range. Furthermore, you can modify the flash duration or on time which aids in picture clarity often necessary in printing processes.

Your smart investment on Shimpo DT-361 LED Stroboscope will allows you to determine speeds, inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, industrial fan inspection plus many more. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section on the machinery.

Shimpo LED Stroboscope DT-361 & DT-365 Serie Features:

 

">