Untuk mendapatkan informasi lebih lengkap tentang:
Shimpo LED Stroboscope series
Segera Hubungi Kami :
(62) 778 408 6403
(62) 815 3611 0114
sales@lfc.co.id
Shimpo LED Stroboscope series is devised by Nidec-Shimpo to measure revolutions, velocity and frequency of rotating components or moving parts. The Shimpo LED Stroboscope series lay an important role in the study of stresses on machinery by measuring its motion, quality control and research. On stock, bright Shimpo LED Stroboscope are able to overpower ambient lighting and make stop-motion effects apparent without the need for dark ambient operating conditions.
Not limited to maintenance and quality control, the Shimpo LED Stroboscope series are also can used as a measuring instrument for determining cyclic speed. Shimpo LED Stroboscope series can be operated as a timing light of which are used in automotive industry to set the ignition timing and sequence on internal combustion engines with several pistons.
Shimpo LED Stroboscope series features:
- For checking scratches, cracks, burr and oscillation on gear meshing of high speed speed revolution machine.
- For revolution speedometer
- In the lamp, long life high luminance white LED is employed.
Visibility of high speed revolution area is improved. - Handy mini type light weight (500g)
- Ultra wide scope of measuring range of 60~120,000 fpm * (1~2000 Hz)
- Even aboard, could be used with relaxation, with CE mark.
- With input/output signal. Radiation synchronized with revolution machine is possible (only DT-326)
- With phase variation function. Rested image phase is possible.
(Can be checked by taking a snap)
SPESIFIKASI Shimpo LED Stroboscope series
Shimpo LED Stroboscope Operation Parts
| Shimpo Model | Standard Model DT-325 | High Function Model DT-326 | ||
|
Unit |
fpm, Hz |
|||
|
Setting Resolution (Inner Part Oscillation) |
60.0~3000.0fpm:0.1fpm, 3000.2~6000.0fpm, 6000.5~12000.0fpm:0.5fpm | |||
|
60.0~30000fpm:1fpm, 30002~60000fpm: 2fpm, 60005~1000000fpm:5fpm, |
||||
| Mode | Inner Part Oscillation | Luminescence Frequency Settings | Luminescence Frequency could be revised to free value through dial | |
| Revised Function | With key operation, luminescence frequency could be revised to 2 times or 1/2 time | |||
| By Pressing the key each time, it changes to 2 times, 4 times, 1/2 times, 1/4 times | ||||
| Phase Revised Function | The present luminescence phase could be shifted by +3 or -3 degrees by pressing the key each time | |||
| Unit Switch Over Function | Setting is possible at "fpm" or "Hz" | |||
|
Outer Parts Trigger |
Lumi. Freq.(input possible Freq.) | - | 1~166Hz, 60~100fpm | |
| Input possible Pulse Width | <50s | |||
| Unit Switch Over Function | "fpm" or "Hz" setting possible | |||
| Parameter Setting | Measurement Range | Setting is possible at 1~2000Hz (60~120000fpm) range or 1~200Hz (60~2000fpm) range | ||
| Trigger edge | - | Possible to select for either upper or lower | ||
| Delay Time (Angle) | - | Delay Period: 0~999ms, Delay Angle: 0~359° | ||
| Back Light | Setting is possible for ON/OFF | |||
Display Part
| Display Parts | (LCD With Back Light) |
6 Digit Numeric Value Display (Main Display). 6 Digit Numeric Value Display (Sub Numeric Value) |
||
| Battery Remaining Qty, Lower Display, Setting Items Display Parts, Unit Display Parts | ||||
| Luminescence |
Luminescence Body |
Ultra High Luminescence White color LED | ||
|
Life (Lumi. Rev. Nos.) |
1500 Hrs. (at 6000fpm luminescence, around more than 5 x 108 times) | |||
| Power Supply | Battery | Alkaline AA Dry Cell (1.5V x 4 Nos.) | ||
| AC Adaptor | - | Exists. 5V 2.0A | ||
| Continuous Lumi. Period | About 80 Minutes | At Normal mode | At Eco mode | |
| Weight | About 500g (Excluding Battery) | |||
The Value is subject to using brand new alkaline battery, luminescence period (ratio) set at 2.5.
Harga Shimpo LED Stroboscope series
Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.
