1. Home
  2. Products
  3. Tool Set Up Machine
  4. Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA

Untuk mendapatkan informasi lebih lengkap tentang:

Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Widia Induction Shrink Fit Unit is devised to help you set up and exchange cutting tools from its collete holders faster and safer. As you do a high speed, or high torque machining you are likely to encounter difficulties in centering and exchanging the tools manually, even more with its chips and sharp swarf from used toolling bit which may injure your operator. You can work on set up routines with maximum toolholder length, from gage line 290mm (11-3/8"). You do not need higly qualified operator to work with this machine. You can say goodbye to jigs and malicious fixture with high deflection risk.

Widia Induction Shrink Fit Unit works by using the principle of safe and controlled induction heat from the shrink fit machine itself while expands the inside diameter of the tool holder bore so the tool shank can be inserted easily. Unlike other shrink fit machine which uses air compressor input, this practical device has air cooling fan which will cool down and contracts the bore to hold the tool. Widia's compact set up machine offer up to 44482.22 Newton of force to grip any tooling bit with extremely rigid and well balanced connection with the colletes.

Your investment on Widia Induction Shrink Fit Unit will benefits you to shrink fit tool bit with its holders while improving centering and reduce vibration with noticeably faster and smoother result. Now you can have a manual milling and lathe machine with highly precise set up within minutes. Widia Induction Shrink Fit Unit will aid you to deliver the quality without deflection and accuracy demanded by today's competitive markets.

 

Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA Features:

  • 8 kW (3,2 kW @ 208V) high-frequency generator — maximum 20 second heat cycle. 380V (400V) 16A electric supply needed for Europe/ROW machine.
  • 3 x 208V/16A electrical supply needed — transformer needed if electrical supply is not 208V ( for North Americas).
  • Air pressure supply not needed.
  • 400mm (15-3/4") D, 310mm (12-1/4") W, 640mm (25-1/4") H.
  • Shrinking capacity carbide only Ø 6–20mm (1/4–7/83/4") with fixed coil. (7/8” for slim holders)
  • Fixed coil for complete range.
  • Maximum toolholder length, from gage line 290mm (11-3/8"). Other lengths with different shanks.
  • Supports all common toolholder shank configurations.
  • HSK/KM32 to HSK/KM100, 30–50V setting pots are available.
  • Integrated fan cooling system.
  • Manual coil position setting.
  • Automatic retreat of induction coil after heating process.
  • PDF catalog on metric can be downloaded here and on inches here (103 MB)

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

SPESIFIKASI Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA

Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA Compatible Toolholder Size:

 
Tool shank ModelCooling Jig length
HSK40 250
HSK50 246
HSK63 239
HSK80 235
HSK100 225
SK30 217
SK40 196
SK50 165

 

Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA Ordering Guide:

 
 Order numberCatalog numberDescription
2429692 TTISG22001 induction shrink unit 380V (400V) CE and FC approved) for Europe and ROW
1950139 TTISG2200NA induction shrink unit 208V (UL and CSA approved) for North America

Note:

The Shrink fit Widia machine is compatible for both CNC toolholder, manual milling and lathe as well. As relative forces in a machining operation are important in the design of machine tools. The machine tool and its components must be able to withstand these forces without causing significant deflections, vibrations, or chatter during the operation. There are three principal forces during a turning process:

  • The cutting or tangential force acts downward on the tool tip allowing deflection of the workpiece upward. It supplies the energy required for the cutting operation.The specific cutting force required to cut the material is called specific cutting force.Cutting force is depends on the material.
  • The axial or feed force acts in the longitudinal direction. It is also called the feed force because it is in the feed direction of the tool. This force tends to push the tool away from the chuck.
  • The radial or thrust force acts in the radial direction and tends to push the tool away from the workpiece.

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

Harga Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Widia Induction Shrink Fit Unit is devised to help you set up and exchange cutting tools from its collete holders faster and safer. As you do a high speed, or high torque machining you are likely to encounter difficulties in centering and exchanging the tools manually, even more with its chips and sharp swarf from used toolling bit which may injure your operator. You can work on set up routines with maximum toolholder length, from gage line 290mm (11-3/8"). You do not need higly qualified operator to work with this machine. You can say goodbye to jigs and malicious fixture with high deflection risk.

Widia Induction Shrink Fit Unit works by using the principle of safe and controlled induction heat from the shrink fit machine itself while expands the inside diameter of the tool holder bore so the tool shank can be inserted easily. Unlike other shrink fit machine which uses air compressor input, this practical device has air cooling fan which will cool down and contracts the bore to hold the tool. Widia's compact set up machine offer up to 44482.22 Newton of force to grip any tooling bit with extremely rigid and well balanced connection with the colletes.

Your investment on Widia Induction Shrink Fit Unit will benefits you to shrink fit tool bit with its holders while improving centering and reduce vibration with noticeably faster and smoother result. Now you can have a manual milling and lathe machine with highly precise set up within minutes. Widia Induction Shrink Fit Unit will aid you to deliver the quality without deflection and accuracy demanded by today's competitive markets.

 

Widia Induction Shrink Fit Unit TTISG22001 and TTISG2200NA Features:

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

">