1. Home
  2. Products
  3. Tool Set Up Machine
  4. Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA

Untuk mendapatkan informasi lebih lengkap tentang:

Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA

Segera Hubungi Kami :

(62) 778 408 6403

(62) 815 3611 0114

sales@lfc.co.id

Widia Induction Shrink Fit Unit is devised to help you set up and exchange cutting tools from its collete holders faster and safer. As you do a high speed, or high torque machining you are likely to encounter difficulties in centering and exchanging the tools manually, even more with its chips and sharp swarf from used toolling bit which may injure your operator. The easily programmable shrink fit system by Widia solve all of these problem and allows manual overriding for customized toolholding application. You can say goodbye to jigs and malicious fixture which has high deflection risk.

Widia Induction Shrink Fit Unit works by using the principle of safe and controlled induction heat from the shrink fit machine itself while expands the inside diameter of the tool holder bore so the tool shank can be inserted easily. This practical device combine both 4 bar (90 psi) air pressure inputs and dedicated coolant sprayer to cool down and contracts the bore to hold the tool with up to 44482.22 Newton of force to grip with extremely rigid and well balanced connection between the colletes and cutting bit.

Your investment on Widia Induction Shrink Fit Unit will benefits you to shrink fit tool bit with its holders while improving centering and reduce vibration with noticeably faster and smoother result. Now you can have a manual milling and lathe machine with highly precise set up within 30 seconds. Widia Induction Shrink Fit Unit will aid you to deliver the quality without deflection and accuracy demanded by today's competitive markets.

 

Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA Features:

  • 10kW high frequency generator – max 5 second heat cycle.
  • Europe/ROW: 3 x 400V/16A electrical supply needed
  • North America: 3 x 480V/16A electrical supply needed.
  • 4 bar (90 psi) air pressure supply needed.
  • 560mm (22") D, 800mm (31,5") W, 1950mm (77") H.
  • Shrinking capacity carbide Ø 3–32mm (1/8–1-1/4") with supplied coil.
  • Shrinking capacity HSS Ø 6–32mm (1/4–1-1/4") with supplied coil.
  • Second coil available to extend range to Ø 50mm (2").
  • Maximum toolholder length for cooling 400mm (15.75") for HSK63 toolholders.
  • Maximum toolholder length for heating 680mm (26,78") for HSK63 toolholders.
  • Virtually hands free automated system.
  • Long life expectancy of toolholders while using pre-programmed parameters.
  • Manual over-ride of pre-programmed parameters, time and power, to allow shrinking of special toolholder designs.
  • Integrated coolant sprayer for consistent cooling down of the adapter within 25 seconds. (Complete toolchange process 30 seconds).
  • Automatic retreat of the toolholder after the cooling and cleaning process is finished.
  • PDF catalog on metric can be downloaded here and on inches here (103 MB)

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

SPESIFIKASI Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA

Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA Ordering Guide:

 
 Order numberCatalog numberDescription
5275129 TTISG3400CCEU induction shrink unit 400V/16A (CE and FC approved) for Europe/ROW
5275038 TTISG3400NA induction shrink unit 480V/16A (UL and CSA approved) for North America

Note:

The Shrink fit Widia machine is compatible for both CNC toolholder, manual milling and lathe as well. As relative forces in a machining operation are important in the design of machine tools. The machine tool and its components must be able to withstand these forces without causing significant deflections, vibrations, or chatter during the operation. There are three principal forces during a turning process:

  • The cutting or tangential force acts downward on the tool tip allowing deflection of the workpiece upward. It supplies the energy required for the cutting operation.The specific cutting force required to cut the material is called specific cutting force.Cutting force is depends on the material.
  • The axial or feed force acts in the longitudinal direction. It is also called the feed force because it is in the feed direction of the tool. This force tends to push the tool away from the chuck.
  • The radial or thrust force acts in the radial direction and tends to push the tool away from the workpiece.

 

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

Harga Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA

Silahkan isi formulir di bawah ini untuk mendapatkan harga terbaik dari tim kami.

Widia Induction Shrink Fit Unit is devised to help you set up and exchange cutting tools from its collete holders faster and safer. As you do a high speed, or high torque machining you are likely to encounter difficulties in centering and exchanging the tools manually, even more with its chips and sharp swarf from used toolling bit which may injure your operator. The easily programmable shrink fit system by Widia solve all of these problem and allows manual overriding for customized toolholding application. You can say goodbye to jigs and malicious fixture which has high deflection risk.

Widia Induction Shrink Fit Unit works by using the principle of safe and controlled induction heat from the shrink fit machine itself while expands the inside diameter of the tool holder bore so the tool shank can be inserted easily. This practical device combine both 4 bar (90 psi) air pressure inputs and dedicated coolant sprayer to cool down and contracts the bore to hold the tool with up to 44482.22 Newton of force to grip with extremely rigid and well balanced connection between the colletes and cutting bit.

Your investment on Widia Induction Shrink Fit Unit will benefits you to shrink fit tool bit with its holders while improving centering and reduce vibration with noticeably faster and smoother result. Now you can have a manual milling and lathe machine with highly precise set up within 30 seconds. Widia Induction Shrink Fit Unit will aid you to deliver the quality without deflection and accuracy demanded by today's competitive markets.

 

Widia Induction Shrink Fit Unit TTISG3400CCEU and TTISG3400CCNA Features:

 

To serve your interest on WIDIA Tooling solution,

Kindly contact our sales department.

">